Articles
You may China Bottom Loading Water Dispensers Manufacturers have among the worst situations found by homeowners up for a kitchen or bathroom renovation. You have purchased a new home or pre owned condo, have embarked on a reno project on your bathroom or washroom.
Upon inspecting, or having a home contractor or handyman embark on the job or work estimate of replacing the floor discover the previous owner knowingly to save construction and renovation costs or unwittingly not realized that they were embarking on shady dealings or a poor bargain from a contractor has laid vinyl peel and stick tiles directly over the subfloor of particle board. It may be that its just general home renovations and upgrades or it may be a case that water has leaked out of the plumbing or over time in the washroom from the fixtures.
You either have to or want to replace that flooring. What is a fix in this situation to either replace flooring or for fixing that thoroughly soaked sub-floor in the bathroom areas?It is definitely a case of all possible worlds that is finding vinyl peel-and stick tiles lying over particle board. You can fix the situation yet in many cases experienced home repair tradespeople and handy men will advise you that this is but a short term fix.In the flooring trades the sub-floor of particle board is often referred to directly as the "underlayment".
Particle board - which some say is among the worst plagues to ever bedevil mankind is in actuality little more than glued compressed sawdust which was a cash cow to its inventor and innovator to its Canadian forest park inventors. A cash cow to the wood mils but not to the average tradesperson or home owner. With what was basically garbage to the wood mills sawdust - a throw away item was converted into a building product and basic staple of home and furniture builders the flip side of the equation that although rigid particle-board is rigid - has no bend.
It can basically lay straight in one piece, be snapped off, but can bend. Worse yet this rigid piece of glued sawdust warps in one giant bend when wet. It cannot be tacked down or held in place when warped. There it bends into the air upwards taking your flooring off the ground. All in al its sole purpose is to provide a smooth surface with which to glue vinyl. Hopefully your particle board has been nailed down to a "beefier" surface such as good old fashioned plywood which to its credit - unlike particle board does have integrity of structure.Yet what can you do to remedy the situation?
For a quick fix you can cut off the damaged sections of underlayment, let the area more than thoroughly dry for several weeks and then replace the damaged tiles. That is if you can find the pattern and a reasonably close in appearance production lot.The beauty of this project is that for most home owners with a little repair skills under their belt can do this simple repair themselves - with a little elbow grease - and thus reduce costs. If not it should be a pretty simple low tech job for a relative with the skills or a local home handyman.A sub floor can present difficulties if soaked with water. Adhesive may have curled at the edges of the tiles themselves. Yet a temporary fix until you call in a professional contractor can be easily done by most home owners - whether in a house, condo or vacation cottage.
Upon inspecting, or having a home contractor or handyman embark on the job or work estimate of replacing the floor discover the previous owner knowingly to save construction and renovation costs or unwittingly not realized that they were embarking on shady dealings or a poor bargain from a contractor has laid vinyl peel and stick tiles directly over the subfloor of particle board. It may be that its just general home renovations and upgrades or it may be a case that water has leaked out of the plumbing or over time in the washroom from the fixtures.
You either have to or want to replace that flooring. What is a fix in this situation to either replace flooring or for fixing that thoroughly soaked sub-floor in the bathroom areas?It is definitely a case of all possible worlds that is finding vinyl peel-and stick tiles lying over particle board. You can fix the situation yet in many cases experienced home repair tradespeople and handy men will advise you that this is but a short term fix.In the flooring trades the sub-floor of particle board is often referred to directly as the "underlayment".
Particle board - which some say is among the worst plagues to ever bedevil mankind is in actuality little more than glued compressed sawdust which was a cash cow to its inventor and innovator to its Canadian forest park inventors. A cash cow to the wood mils but not to the average tradesperson or home owner. With what was basically garbage to the wood mills sawdust - a throw away item was converted into a building product and basic staple of home and furniture builders the flip side of the equation that although rigid particle-board is rigid - has no bend.
It can basically lay straight in one piece, be snapped off, but can bend. Worse yet this rigid piece of glued sawdust warps in one giant bend when wet. It cannot be tacked down or held in place when warped. There it bends into the air upwards taking your flooring off the ground. All in al its sole purpose is to provide a smooth surface with which to glue vinyl. Hopefully your particle board has been nailed down to a "beefier" surface such as good old fashioned plywood which to its credit - unlike particle board does have integrity of structure.Yet what can you do to remedy the situation?
For a quick fix you can cut off the damaged sections of underlayment, let the area more than thoroughly dry for several weeks and then replace the damaged tiles. That is if you can find the pattern and a reasonably close in appearance production lot.The beauty of this project is that for most home owners with a little repair skills under their belt can do this simple repair themselves - with a little elbow grease - and thus reduce costs. If not it should be a pretty simple low tech job for a relative with the skills or a local home handyman.A sub floor can present difficulties if soaked with water. Adhesive may have curled at the edges of the tiles themselves. Yet a temporary fix until you call in a professional contractor can be easily done by most home owners - whether in a house, condo or vacation cottage.
With the emergence of water conservation, reclamation, and reutilization in the United States, gray water has taken on greater significance.What is Gray Water?Gray water is wastewater from domestic, industrial and OEM water dispenser commercial facilities that does not contain sanitary wastes or food-related wastes.Where does it come from?
It can come from bathtubs, showers, bathroom sinks and washing machines. Generally any water source other than toilets in your home or business can be considered gray water.Is gray water harmful?Yes. If not handled properly, gray water can pose a risk to public health and the environment. It's important to understand that gray water can contain harmful bacteria, viruses, and chemicals.What's the benefit of gray water?
Gray water is generally an excellent source of reclaimable water. Once properly treated, the water can be reutilized for landscape irrigation, wash water for vehicles, potential water for cooling towers, toilets, urinals, and many other uses.Regulations and ratings:There are many new and proposed regulations that will mandate the use of gray water for achieving "green" building, recycling and energy-reduction objectives.
Such programs include the Leadership in Energy and Environmental Design (LEED) Green Building Rating System.LEED is a nationally accepted benchmark developed by the U.S. Green Building council that provides third-party verification for the design, construction and operation of high-performance green buildings.The intent is to improve energy savings, indoor environmental quality, water efficiency, lower CO2 emissions, and stewardship of resources.
According to the USGBC site (usgbc.org/), "LEED provides building owners and operators with the tools they need to have an immediate and measureable impact on their buildings' performance." Founded in 1998, the U.S. Green Building council now includes over 14,000 projects in the U.S. and 30 countries.What to look for in a gray water treatment firm:Every gray water project is unique.
Before applying for a gray water use permit, look for an environmental solutions or treatment firm that can evaluate your specific site conditions, challenges and long-term objectives. The optimal choice will be a company that can design a complete turnkey program that will meet current as well as future needs.
A thorough evaluation of your application will be necessary before gray water can be reused for any landscape irrigation project, or re-utilized in flush toilets and urinals.Qualifying for LEED Credits:Gray water recovery, treatment and distribution systems may qualify for Leadership in Energy and Environmental Design (LEED) credits towards your remodel or new project. Look for a company that can help you maximize those credits through high-quality systems that perform as designed.
Remember that gray water treatment systems must also meet current building code requirements. Be aware that local building requirements can differ widely in some communities.Maintenance and Monitoring:
Your gray water program will likely require an ongoing commitment that includes scheduled maintenance and monitoring to insure your investment in gray water recovery and reutilization performs over the long term.Ongoing Communication:It's important to maintain an interface and continue to dialogue with local and state governing agencies that approve and promote gray water programs. This will help to improve the quality and efficiency of your gray water program.
It can come from bathtubs, showers, bathroom sinks and washing machines. Generally any water source other than toilets in your home or business can be considered gray water.Is gray water harmful?Yes. If not handled properly, gray water can pose a risk to public health and the environment. It's important to understand that gray water can contain harmful bacteria, viruses, and chemicals.What's the benefit of gray water?
Gray water is generally an excellent source of reclaimable water. Once properly treated, the water can be reutilized for landscape irrigation, wash water for vehicles, potential water for cooling towers, toilets, urinals, and many other uses.Regulations and ratings:There are many new and proposed regulations that will mandate the use of gray water for achieving "green" building, recycling and energy-reduction objectives.
Such programs include the Leadership in Energy and Environmental Design (LEED) Green Building Rating System.LEED is a nationally accepted benchmark developed by the U.S. Green Building council that provides third-party verification for the design, construction and operation of high-performance green buildings.The intent is to improve energy savings, indoor environmental quality, water efficiency, lower CO2 emissions, and stewardship of resources.
According to the USGBC site (usgbc.org/), "LEED provides building owners and operators with the tools they need to have an immediate and measureable impact on their buildings' performance." Founded in 1998, the U.S. Green Building council now includes over 14,000 projects in the U.S. and 30 countries.What to look for in a gray water treatment firm:Every gray water project is unique.
Before applying for a gray water use permit, look for an environmental solutions or treatment firm that can evaluate your specific site conditions, challenges and long-term objectives. The optimal choice will be a company that can design a complete turnkey program that will meet current as well as future needs.
A thorough evaluation of your application will be necessary before gray water can be reused for any landscape irrigation project, or re-utilized in flush toilets and urinals.Qualifying for LEED Credits:Gray water recovery, treatment and distribution systems may qualify for Leadership in Energy and Environmental Design (LEED) credits towards your remodel or new project. Look for a company that can help you maximize those credits through high-quality systems that perform as designed.
Remember that gray water treatment systems must also meet current building code requirements. Be aware that local building requirements can differ widely in some communities.Maintenance and Monitoring:
Your gray water program will likely require an ongoing commitment that includes scheduled maintenance and monitoring to insure your investment in gray water recovery and reutilization performs over the long term.Ongoing Communication:It's important to maintain an interface and continue to dialogue with local and state governing agencies that approve and promote gray water programs. This will help to improve the quality and efficiency of your gray water program.
No one looks forward to seeing a green pond out their back window. The reason most of RO water dispenser us put in our pond is to enjoy the ecosystem that's created. We want to watch the fish swim, nurture the plants to grow and maybe even hear the bubbling of the water fall as it cascades gently over the rocks into the water, bringing oxygen and life to fish. but every once in a while we look at our back windows and we see a greenish tent to our water.
Our fish become harder to see and this kind of bums us out. But what can we do about it?The first thing we need to do is understand why algae grows. Believe it or not is a very natural part of any aquatic ecosystem. Sunlight is the main catalyst of photosynthesis and when it strikes the water we should expect nothing but algae growth. Sunlight is like filet mignon to algae. Absolutely tasty! Plus, it increases the temperature of your pond's water, fostering a rapid growth environment. This is the way of nature. most ponds need a certain amount of algae for the flora and find out within to grow properly.
But an excessive amount of algae growth can be detrimental.The most important thing in any ecosystem is balance. The best way to balance your pond is with submerged plants like anacharis, cabomba and/or hornwort. These plants are essential to any aquatic environment because they compete with algae for the nutrients in your water. They are also what are called oxygenating plants, releasing fresh oxygen into your pond water.
Anacharis in particular also works as a wonderful filter, catching and holding suspended material in your pond. These plants are fertilized by fish waste and carbon dioxide, and many fish actually eat them. Don't worry though, the plants do grow pretty fast, and in a normal environment, the fish can't keep up. Just make sure you don't have too many fish when compared with how many plants are in your pond.Another method of balance is the utilization of floating plants. Floating plants are usually plants with broad shaped leaves that "float" on the surface of your ponds water.
Not only are they beautiful, but they also limit direct sunlight and create wonderful shade for your fish, keeping the overall water temperature down. They curb the growth of algae and provide your fish with a natural food source. Java moss, floating hearts and giant water snowflake are just a few of the types of plants that will work well in this application.As you can see the control of algae is not a very difficult. If thought through logically (and if you understand the basics of algae growth) you can see that there are many deterrents that are quite effective. remember, a little bit of algae is not a bad thing. A number of goldfish and bottom feeders need algae to survive. But let's not go overboard. No one wants their pond looking like a bowl full of green Jell-O.
Our fish become harder to see and this kind of bums us out. But what can we do about it?The first thing we need to do is understand why algae grows. Believe it or not is a very natural part of any aquatic ecosystem. Sunlight is the main catalyst of photosynthesis and when it strikes the water we should expect nothing but algae growth. Sunlight is like filet mignon to algae. Absolutely tasty! Plus, it increases the temperature of your pond's water, fostering a rapid growth environment. This is the way of nature. most ponds need a certain amount of algae for the flora and find out within to grow properly.
But an excessive amount of algae growth can be detrimental.The most important thing in any ecosystem is balance. The best way to balance your pond is with submerged plants like anacharis, cabomba and/or hornwort. These plants are essential to any aquatic environment because they compete with algae for the nutrients in your water. They are also what are called oxygenating plants, releasing fresh oxygen into your pond water.
Anacharis in particular also works as a wonderful filter, catching and holding suspended material in your pond. These plants are fertilized by fish waste and carbon dioxide, and many fish actually eat them. Don't worry though, the plants do grow pretty fast, and in a normal environment, the fish can't keep up. Just make sure you don't have too many fish when compared with how many plants are in your pond.Another method of balance is the utilization of floating plants. Floating plants are usually plants with broad shaped leaves that "float" on the surface of your ponds water.
Not only are they beautiful, but they also limit direct sunlight and create wonderful shade for your fish, keeping the overall water temperature down. They curb the growth of algae and provide your fish with a natural food source. Java moss, floating hearts and giant water snowflake are just a few of the types of plants that will work well in this application.As you can see the control of algae is not a very difficult. If thought through logically (and if you understand the basics of algae growth) you can see that there are many deterrents that are quite effective. remember, a little bit of algae is not a bad thing. A number of goldfish and bottom feeders need algae to survive. But let's not go overboard. No one wants their pond looking like a bowl full of green Jell-O.